Skip to main content

Posts

Showing posts with the label PIC Timer

Programmable digital timer with a relay switch

This project shows how to make a simple programmable digital timer switch with a PIC16F628A microcontroller. The timing schedule for the relay switch can be programmed through 4 push buttons. The program menu, the status of the relay switch and time information is shown on a character LCD.

00-99 Minutes Timer

Introduction This project describes how to program PIC16F628A to function as a 00-99 min programmable timer. User can set any time between 00-99 minutes and can turn ON a device for that period. The device will be automatically turned OFF after the time expires. For demonstration, the ON/OFF condition of device is simulated by switching LED ON and OFF. With the use of three input switches (unit, ten, start/stop) the user can set ON time of the timer and can also control Start/Stop operation. The two time set switches are for selecting unit and tens digit of minute time interval (00-99). Once you set the value of minute interval, pressing the Start/Stop will turn the timer ON (LED will glow), and pressing the same button again at any point of time during timer operation will interrupt the process (LED will turn OFF) and the timer will be reset. LCD display will provide timer status and user interface for setting time. Setup Connect SW1, SW2, and SW3 to RB0, RB1, and RB2 respectively...