Skip to main content

Posts

Showing posts with the label PIC16F628A Experiments

PIC16F628A Experiments

Here's the list of all the experiments I have posted on this blog. I have performed these experiments on my PIC16F628A development board. (First read about my PIC16F628A Development Board )

Experiment No. 7: Timers and Interrupts

Background Many microcontroller applications like generating periodic signals, measuring time interval, keeping date and time, use time as their variable. Therefore, microcontrollers need to have some internal resources to accurately measure time. The PIC16F628A has 3 timer modules which are known as Timer0 , Timer1 , and Timer2 . The basic unit of a timer is a free-run 8-bit or 16-bit incrementing synchronous counter which can be programmed to count internal or external pulses. The count number stored by each counter can be read or modified by accessing the special function register associated with that timer. Some of the bits in these registers are also the indicators of timer overflow, which, therefore, can generate interrupt request to the microcontroller. The use of timer modules to keep record of time elapsed allows the microcontroller to carry on with its other operations like controlling outputs, reading inputs, etc. Timers can also have another asynchronour counter, known...

Experiment No. 6: Read/Write Internal EEPROM Memory

An EEPROM (Electrically-Erasable Programmable ROM) data memory is one of the important features of flash-based PIC microcontrollers. It is called non-volatile to indicate that it retains the data even when the power is down. Practically speaking, if you want to design a digital lock system, then the password to unlock the system can be saved into the EEPROM, so that when the power is down, the password will still be saved. And other good thing is that the data can be easily modified or overwritten with software control. In this experiment, I am going to show you how to read and write in to the internal EEPROM memory of PIC16F628A using mikroC EEPROM library functions. Here is what we are going to do: We will write 0s to 10 EEPROM locations. We will read them first, then write 0-9 to these locations, and turn the power off. We will turn the power on, and read the data in those locations and see. I have created a simple menu on LCD with Read, Write and Delete functions. Experimental...

Experiment No. 5: Multiplexed Seven Segment Displays

In this experiment, we are going to learn how to interface more than one 7-segment LED display to a PIC Port using multiplexing technique. We are going to interface a 4-digit common cathode seven segment display to our PIC board. The multiplexing circuit is already built up in the board using 4 transistors and few resistors (Read Make Your Own PIC Development Board ). The basic idea of multiplexing is that all seven segment displays are connected to the microcontroller in parallel and the microcontroller alternately prints ones, tens, hundreds, and thousands digits, selecting one at a time. The switching among the digits is so fast that it gives an impression of simultaneous light emission. Experimental Setup: 1. Connect RA0 through RA3 to 7-Segment Digit Select headers DG1, DG2, DG3, and DG4 using jumper wires. 2. Insert 7FR5641AS 4-Digit Seven Segment module in to its place on the board.

Experiment No. 4 : Reading Temperature Values from DS1820 using 1-Wire Protocol

In this experiment, we are going to build a digital temperature meter using DS1820 connected to our PIC16F628A development board. The temperature value will be displayed on the LCD display. I have modified the sample program that comes with the compiler according to our PIC board requirements. Also I have elaborated comments in the program so that every step will be more clear to the readers. Experimental Setup: The experimental setup is very straight-forward. Place DS1820 device on the three-pin female header that we recently added to our board. And also connect the data pin of DS1820 to RB.0 pin of PIC16F628A using a jumper wire.  

The 1-Wire Communication Protocol

The 1-Wire is a registered trademark of Dallas Semiconductor Corp (now Maxim) for a serial communication protocol using a single data line and a ground reference. A 1-Wire Master (a microcontroller) initiates and controls the communication with one or more 1-Wire Slave devices (usually sensors). Each 1-Wire slave device has a unique, factory-programmed , 64-bit identifier, which serves as device address on the 1-Wire bus. This globally unique address is composed of eight bytes divided into three main sections. Starting with the LSB, the first byte stores the 8-bit family codes that identify the device type. The next six bytes store a customizable 48-bit individual address. The last byte, the most significant byte (MSB), contains a cyclic redundancy check (CRC) with a value based on the data contained in the first seven bytes. This allows the master to determine if an address was read without error. With a 248 serial number pool, conflicting or duplicate node addresses on the net are ne...

Experiment No. 3: LCD Interface in 4-bit Mode

The objective of this experiment is to interface a 16x2 LCD to PIC16F628A in 4-bit mode. This means the data transfer will use only four pins of the microcontroller. There is no additional hardware setup needed for this experiment, as we have a ready-made LCD interface female header. We only need to define the data transfer and control pins in the software. Remember, the LCD interface in our development board uses the following pins of PIC16F628A: Data Transfer : D4 -> RB4, D5 -> RB5, D6 -> RB6, D7 -> RB7 RS -> RA0, and EN -> RA1

Experiment No. 2 : Push Button and Seven Segment Display Interface

In this experiment, we will program the PIC16F628A as an UP/DOWN Decade Counter. The count value will be displayed on a Seven-Segment Display and will be incremented/decremented by two push buttons on the board. Experimental Setup: The board has built in interface for a multiplexed 4-digit seven segment display (HS-5461AS2 from www.futurlec.com ).We will select only one digit by connecting a Digit Select pin to Vcc, as shown in figure below. A black jumper wire is used for this purpose. The seven segments will be driven through PORTB (already wired on the board). Connect Push Buttons (PB3 and PB4) to RA1 and RA0 female headers using jumper wires.

Experiment No. 1 : 4-Bit Binary Counter

Experimental Setup: The first experiment that we are going to do with our PIC16F628A board is a 4-bit binary counter that counts from 0(00h) to 15(0Fh) with 1sec delay between each count. The output will be at RB.0 through RB.3 and will be displayed on 4 LEDs. Use four jumper wires to connect RB.0 through RB.3 to LEDs. The picture below shows these connections. Figure 1. Jumper Connections for a 4-bit Binary Counter